Pickup currently not available
The Garvee pontoon boat cover is designed for suitable pontoon boats with a length of approximately [7,6 to 8,5 m] and a width of up to approximately [2,6 m]. The [300D] Oxford fabric with a multi-layered PU coating is suitable for covering the boat during storage as well as for its intended use on a suitable trailer.
15 Adjustable straps with buckles, an elastic hem, integrated ventilation openings, and reinforced and sealed seam areas complement the construction for fastening, coverage, and regular use.
The cover is designed for suitable pontoon boats with a length of approximately 7,6–8,5 and a width of up to approximately 2,6.
The Oxford fabric is complemented by a multi-layered PU coating with a specified water pressure resistance of up to 1.500 Pa.
The straps with buckles and the elastic hem support the adjustment and attachment of the tarpaulin to the suitable pontoon boat.
Das 300D Oxford-Gewebe wird durch eine mehrlagige PU-Beschichtung ergänzt. For the complete Konstruktion there is a Wasserdruckbeständigkeit of up to 1,500 Pa angegeben.
Double-stitched areas and additional seam seals reinforce the tarpaulin at joints and in areas subject to heavier wear.
The Oxford fabric forms the basic textile construction of the boat cover and is designed for repeated putting on, taking off and storing.
Reinforced areas complement the construction in places that may be subjected to greater stress during fastening and folding.
Integrated ventilation openings support air circulation between the boat and the cover.
At the same time, they can help reduce the air pressure under the tarpaulin if air gets between the boat hull and the cover.
The ventilation openings complement the cover, especially during longer storage periods of the pontoon boat.
The boat should be as clean and dry as possible before covering it, so that moisture is not unnecessarily trapped under the cover.
The set includes 15 adjustable straps with buckles. They can be routed and adjusted around the boat according to the designated attachment points.
The elastic hem further supports the adjustment of the tarpaulin along the lower coverage area.
The combination of straps, buckles and elastic edge allows for adaptation to different areas of a suitable pontoon boat.
Before storage or transport, the fit and alignment of the cover, as well as the tension and closure of all straps used, should be checked.
The package includes the pontoon boat cover, 15 adjustable straps with buckles, a storage bag and a product instruction manual.
The folded boat cover can be stored more compactly in the bag after use.
The cover is designed for suitable pontoon boats with a length of approximately 7,6 to 8,5 m.
When choosing the size, in addition to the boat length, width, railing, steering console and other superstructures should also be taken into account.
The intended maximum boat width is approximately 2,6 m.
Since railings, consoles and other superstructures change the actual contour of the boat, length, width and overall construction should be checked against the dimensions of the cover.
The pontoon boat cover is designed for storage as well as for its intended use on suitable pontoon boats on a trailer.
Before transport, the tarpaulin should be correctly aligned and all straps used should be attached to the designated points and checked.
| Brand | Garvee |
| Product type | Pontoon boat cover |
| Suitable boat length | Approx. 7,6–8,5 m |
| Max. boat width | Approx. 2,6 m |
| material | 300D Oxford fabric |
| coating | Multi-layer PU coating |
| Water pressure resistance | Up to 1.500 Pa |
| fastening | 15 adjustable straps with buckles |
| ventilation | Integrated ventilation openings |
| Colour | Gray |
The Garvee pontoon boat cover combines 300D Oxford fabric with a multi-layered PU coating, reinforced seams, integrated ventilation, an elasticated hem, and 15 adjustable straps. It is designed for suitable pontoon boats approximately 7.6 to 8.5 meters long and up to approximately 2.6 meters wide.