Pickup currently not available
The Garvee hydraulic steering kit is designed for a single outboard motor up to a total of 300 HP and a single steering station. The essential components of the hydraulic steering system are combined in one kit.
Included are hydraulic cylinders, hydraulic steering unit, steering wheel with a diameter of 34,3 cm, two hydraulic hoses each approximately 6,1 m long, and the intended connection fittings.
The system is designed for a single outboard motor with a total of up to 300 HP.
Two long nylon hydraulic hoses offer flexibility for different hose routing in the boat.
A steering wheel with a diameter of 34,3 cm is part of this version of the hydraulic steering set.
The hydraulic cylinder included in the set has an integrated two-way valve and handles the transmission of the hydraulic movement to the intended outboard steering mechanism.
The cylinder is specified with an output force of 452 kgf. The valve design is intended to limit feedback during steering movements.
The output force of the hydraulic cylinder is specified as 452 kgf.
The cylinder converts the hydraulic pressure of the system into the corresponding movement of the connected steering mechanism.
The hydraulic steering unit is designed for a maximum operating pressure of 6,9 MPa.
When the steering wheel is operated, the hydraulic movement is transmitted to the cylinder via the connected hoses.
The steering unit has a replaceable shaft seal.
This allows the component to be replaced separately if maintenance is required.
Included in the delivery is a steering wheel with a diameter of 34,3 cm.
The steering wheel and hydraulic steering unit together form the operating side of the system at the designated control station.
The set contains two hydraulic hoses, each approximately 6,1 m long.
The hoses are made of nylon and connect the hydraulic steering unit to the cylinder. Their long design allows for flexibility in routing the hoses within the boat.
The hydraulic hoses can be adjusted to the required length according to the intended installation.
This allows the cable routing to be adapted to the respective installation situation, if the full length of approximately 6,1 m is not required.
The hydraulic hoses feature a 1/4 inch connection configuration for the intended connection within the steering system.
Before installation, the connection points, mounting geometry and the existing outboard configuration should be checked against the steering system.
The hydraulic steering kit is designed for single-engine outboard boats with a total engine power of up to 300 PS.
The applications mentioned include runabouts and inflatable boats. The design is described for a single outboard motor and a single steering station.
This version is designed for a boat with one steering position.
It is not described as a multi-station steering system and should be used according to the intended motor and control configuration.
The central components of the hydraulic steering system are combined in one set.
The scope of delivery includes hydraulic cylinders, hydraulic steering unit, steering wheel, two hydraulic hoses and the intended connection fittings.
| Brand | Garvee |
| Product type | Hydraulic steering set |
| Engine power | up to 300 PS |
| Engine configuration | 1 Outboard motor |
| Control station | 1 |
| hose length | 2 × approx. 6,1 m |
| Hose material | nylon |
| steering wheel diameter | 34,3 cm |
| Max. operating pressure | 6,9 MPa |
| Cylinder output force | 452 kgf |
The Garvee hydraulic steering kit combines a hydraulic cylinder with an integrated two-way valve, a steering unit capable of up to 6.9 MPa, a 34.3 cm diameter steering wheel, and two approximately 6.1 m long nylon hydraulic hoses. This version is designed for a single outboard motor with a total output of up to 300 hp and a single steering station.