The Garvee 4er set of scissor supports is designed for the additional stabilization of suitable caravans and motorhomes at their pitches. Four separate supports allow for bracing at several designated points on the vehicle.
Each scissor support is height-adjustable from approximately [10] to [61] cm and has a load capacity of up to [3.402] kg. The steel construction is complemented by wide base plates, a powder-coated surface, and two height adjustment options.
Each individual scissor support is designed for a specified load capacity of up to 3.402 kg.
The height range can be adjusted to different distances between the vehicle and the ground.
Four separate supports allow for additional stabilization at several suitable vehicle positions.
The scissor mechanism allows an adjustment range of approximately 10 to 61 cm.
This allows each support to be adjusted to the respective distance between the intended attachment point on the vehicle and the ground.
The four scissor supports can be adjusted independently to the required height.
This allows for different distances to be taken into account at the individual support positions without all four supports having to be the same height.
Each individual scissor support has a load-bearing capacity of up to 3.402 kg.
This value refers to the individual support. The load-bearing capacities of the four supports are therefore not added together to determine the overall load-bearing capacity of the set.
The supporting structure of the scissor supports is made of steel.
The profiled frame, together with the scissor mechanism, forms the basis for the height adjustment and the intended stabilization of the parked vehicle.
The supports have wide, profiled base plates.
The enlarged contact area distributes the contact with the ground over a larger area and supports the positioning of the support on a suitable surface.
A crank is available for manual height adjustment.
The support can be extended to the required height or lowered again via the drive mechanism of the scissor mechanism.
In addition to the manual crank, the design features a square drive.
This means that the height adjustment can alternatively be carried out using a suitable tool.
The design features a locking mechanism to fix the selected support position.
This ensures that the set height is maintained for the intended stabilization application.
The steel structure has a powder-coated surface.
The coating forms an additional protective layer on the steel and is tailored to its intended use around caravans and motorhomes.
The scissor supports are suitable for the additional stabilization of a parked caravan or suitable motorhome.
They can be used, for example, at campsites, motorhome pitches and suitable parking areas.
When retracted, the support reaches a height of approximately 10 cm.
The relatively flat design makes storage easier when the scissor supports are stowed away after use.
| Brand | Garvee |
| Product type | Scissor support |
| Set contents | 4er-Set |
| Load-bearing capacity per support | up to 3.402 kg |
| Adjustment range | approx. 10–61 cm |
| material | Steel |
| operation | Crank and square drive |
| base plate | Wide and profiled |
| surface | Powder-coated |
| scope | Caravans and suitable motorhomes |
The Garvee 4er set of scissor stabilizers combines an adjustment range of approximately 10 to 61 cm with a specified load capacity of up to 3.402 kg per stabilizer, a steel construction, wide base plates, and a crank and square drive. This allows for additional stabilization of a suitable caravan or motorhome at several designated positions.