The Garvee fire pit ring, with a diameter of approximately 152 cm, provides a generous enclosure for a suitable wood-burning fire pit. It creates a central fire area for shared evenings in the garden, courtyard, or at a designated campsite.
The structure consists of eight individual steel segments. These are assembled using the provided plug-in connections and can be disassembled again for transport or storage after they have completely cooled down.
The diameter of approximately 152 cm is suitable for generously planned wood-burning fireplaces and correspondingly sized outdoor areas.
The eight steel segments are joined together at the designated connections to form a closed ring.
Depending on its design, the ring can stand on a suitable surface or be integrated into a prepared fire pit.
With a diameter of approximately 152 cm, the fire pit ring offers a generously sized burning area. This makes it suitable for larger gardens, courtyards, and suitable camping areas with sufficient safety distance.
Even with this large diameter, the ring must not be overfilled. Firewood, flames, and embers must remain within the designated fire area.
The fire pit ring consists of eight individual elements. The steel segments are slotted together at the designated connection points, so no additional tools are required for basic assembly.
Before lighting the fire, all connections must be checked. The segments must be fully assembled, evenly aligned, and stably positioned.
The design limits the combustion area without completely sealing it. This allows air to reach the firewood from above and through the open base.
The fire pit ring is not completely smoke-free. The amount of smoke and combustion depend on factors such as the type of wood, its moisture content, air supply, wind, and weather conditions.
The steel ring can be used freestanding on a suitable, solid, and fire-resistant surface. Alternatively, it can be integrated into a suitably prepared ground or stone structure.
For recessed installations, drainage, air supply, heat exposure and locally prescribed safety distances must be taken into account during the planning phase.
The steel segments form a stable boundary for the fire area. After use, ash, moisture, and dirt should only be removed after the fire has completely cooled down.
Steel is not permanently rust-free. Surface damage and persistent moisture can promote corrosion. Therefore, dry, protected storage of the cleaned segments is recommended.
Once completely extinguished and cooled, the ring can be disassembled into its eight segments. The individual elements are easier to transport and require less storage space than a one-piece fire pit ring.
All steel parts must be completely dry before storage. Plug connections should be regularly checked for deformation or other damage.
| Brand | Garvee |
| Product type | Fire pit ring |
| form | Around |
| diameter | Approx. 152 cm |
| material | Steel |
| Number of segments | 8 |
| Connection | plug-in system |
| Assembly | Tool-free |
| use | Freestanding or recessed |
| Area of application | outdoor area |
Safety instructions: Use only outdoors and on a level, firm, and fire-resistant surface. Maintain a safe distance from buildings, plants, and other flammable materials. Observe local fire safety regulations, never leave the fire unattended, and allow the ring to cool completely before disassembly or cleaning.
The Garvee fire pit ring combines a diameter of approximately 152 cm with eight steel segments that can be assembled without tools. The freestanding or recessed construction provides a generous enclosure for suitable wood-burning fire pits in the garden and while camping.